Lumatek 250w 240v

Categories: ,
Description

Description

High performance with low power consumption: The astounding output with low operating costs make the 250W an interesting product for beginners or professional growers of light-sensitive crops.

A ballast is crucial when operating grow lighting, such as HPS or metal halide lamps, in order to convert the power source so that it may be used by the lamp. Depending on the type of plant and the light cycle, ballasts are required for 8 to 24 hours per day, which is why you should avoid using less efficient products for this purpose.

Conventional (non-electronic) ballasts waste a large proportion of the energy consumed as useless heat, experience a reduction in performance over time, and can even catch fire (e.g. through extended use).

Electronic ballasts control start phases and performance output via microprocessors, which improves the lamp performance and means that less energy is wasted as heat. Even in long-term operation, the Lumatek 250W will only become lukewarm and has an automatic interrupt mechanism for increased safety in case of a short or power surge.

Thanks to the Superlumen switch, the Lumatek 250W can increase the luminosity of HPS lamps by up to 10%. The device also allows the use of metal halide lamps, however they can not be dimmed and must be operated at their respective output level! (e.g. 250W MH = 250W setting on the ballast, or with the Superlumen switch set to ?off?).

As the Lumatek 250W is delivered complete with fixed cable connectors (each approx. 4m), you only need to connect the light fixtures before putting it into operation.

Key Specifications:

Electronic ballast for 150W,175W or 250W HPS or MH lamp
Voltage: 240V 50/60Hz
Current: 1.20A
Input Power: 265W
Output power: 250W
Power factor: >0.99
Voltage range: 175 to 275V
THD: <8%
Lamp CCF: <1.7
Operating frequency: high frequency
No audible noise, no flicker
Envirement temperature for full load operation: -25 to 50°C (-13 to 122°F)
Enclosure temperature rise: (Δt) 25 °C (77 °F)
Environment IP require: >IP23
Humidity: capable of operating in relative humidity of 0% to 90%,non-condensing.

Special Features:
To light a 150W lamp; set control to 150W.
To light a 175W lamp; set control to 175W or dim to 150W.
To light a 250W lamp; set control to 250w and boost output by 10% by switching to ‘Super Lumens’ or dim down to 175W or 150W.
Brand

Brand

Lumatek

Contact Us

We're not around right now. But you can send us an email and we'll get back to you, asap.

Not readable? Change text. captcha txt
0